|
|
| |
pulveriser |
|
|
| Air-Tech Pulveriser is specially designed to reprocess
the rejects & to convert it into free flowing powders. It is suitable for rigid PVC Pipes,
Profiles, Sheets & Injection Moulding rejects.
The feed material should be pre grinded into 4-8mm size. The Pulveriser provides
hammering & milling action between toothed rotary & fixed segments. The specially
designed tooth is result of our constant R & D. |
| |
| Features |
| |
- The Main housing is fabricated out of Heavy
Duty M.S Plates. The top circular half is made
out of Special allow steel duly hardened & has
fixed toothed shape from inside while bottom
half is fitted with screen of suitable mesh. The
housing has jacket all around of mild steel
for cooling by circulation of chilled water to
control the frictional heat generated during
milling operation.
- The rotor is made out of Alloy steel & is fitted
with 16 Hammers . On the tip of the Hammers V
Shaped Teeth Rack is fixed which is hardened
for giving a long life.
- Heavy duty Bearing Housing of Mild Steel with
best quality high speed bearings & is water
cooled for long trouble free service.
- Heavy duty fame fabricated out of different
M.S Sections to absorb all type of vibrations
during operations.
- Dosing Device for automatic feeding with AC
Geared Motor & Variable frequency drive for
uniform feeding.
- Robust Dust Proof Panel having Main switch,
Starter, Ampere & Volt Meter, AC Drive for
dosing motor.
|
| |
| |
| Techinical Specifications |
| MODEL NO |
MAIN MOTOR (H.P) |
OUT PUT RATE (Kgs/Hr) |
Dosing Geared Motor |
| ATP-75 |
20 |
75-80 |
1 H.P |
| ATP-125 |
30 |
125-150 |
1 H.P |
| ATP-200 |
40 |
175-200 |
1 ½H.P |
|
| |
| Utility: |
- Electric supply 415 Volts, 3 Phase 50 Cycles AC
- Water pressure 1-2 Kgf/cm2
|
| |
| Note: |
| For the betterment of the product the above specifications
can be changed without notice |
| |
| |
| |
| |
| |
|
|
| |
|
|
| |
|
|
| |
|
|
|
